| Model |
CTV-1000 |
CTV-1500 |
| NPUT |
Capacity |
1000VA/700W |
1500VA/900W |
| Voltage |
+/-15% at line input, single
phase |
| Frequency |
50 or 60Hz (auto sensing) |
| AC OUTPUT |
Voltage |
(60V or 90V) +/-7% at AC
mode
(60V or 90V) +/-3% at inverter mode
pure sinewave |
| Frequency (on battery) |
50 or 60Hz +/-0.5% |
Voltage Regulation
(AVR) |
AVR automatically increase
output
voltage 10% above input voltage
if -5% to -15% of nominal.
AVR decrease output voltage 10%
below input voltage if +5% to +15% of nominal. |
PROTECTION
&
FILTERING |
Spike Protection |
320 Joules, 2ms |
| Unit Input |
Breaker |
| EMI/RFI filter |
10dB at 0.15MHz, 50 dB
at 30MHz |
| Overload Protection |
UPS automatic shutdown
if overload exceeds 110%
of nominal at 20 seconds and 130% at 3 seconds
(Overload Protection Release : Auto On UPS) |
| Transfer Time |
2/4 milliseconds (typical),
including detection time |
| Short Circuit |
UPS output cut off immediately
or input breaker protection
(Short Circuit Release : Auto On UPS) |
| BATTERY |
Type |
12V 26AH x 2
(sealed, maintenance-free lead acid) |
| Protection |
Automatic self-test &
discharge protection |
| Built-in fast charger |
Nominal : 5.5A, 3.5A~8A
adjustable |
| Back Up Time |
30 minuets (full load) |
20 minuets (full load) |
| NET WEIGHT |
Kg (lbs) |
52.5 (115.5 lb) |
| DIMENSION |
W x D x H (mm) |
340 x 490 x 700 (13.4"
x 19.3" x 27.6") |
LCD
Indicators |
Status |
Indicate line, bypass,
inv, backup, fault, bat capacity,
load capacity, I/P frequency, O/P voltage, O/P frequency,
inside temperature, fault status, load |
| ALARM |
Battery Back-up |
Slow beeping sound (about
0.25Hz) |
| Battery Low |
Rapid beeping sound (about
1.00Hz) |
| Overload |
Continue beeping sound |
| ENVIRONMENT |
Ambient operation |
3,500 meters max. elevation,
0-95% humidity non-condensing, -30 ~ +60 deg |
| Audible noise |
<40dBA (1 meter from
surface) |
| Storage condition |
15,000meters max. elevation |
