| MODEL |
|
COM 250 / 350 /
500 / 650 / 850 (S) |
| INPUT |
Capacity |
250VA / 350VA / 500VA
/ 650VA / 850VA |
Voltage
(single phase) |
100V +20% / -15%
at line input, 115V +/-20% at line input
220V +/-25% at line input, 240V +15% / -20% at line
input |
| Frequency |
50 or 60Hz +/- 10%
(auto sensing) |
| ONPUT |
Voltage
(on battery) |
Simulated sine wave
at
100V/ 115V or 220V / 240V +/- 5% |
Frequency
(on battery) |
50 or 60Hz +/- 0.3Hz |
| Transfer Time |
2/4 milliseconds,
including detection time |
| PROTECTION |
Unit Input |
Fuse for overload
& short circuit protection |
| Overload Protection |
UPS automatic shutdown
if overload exceeds
105% of nominal at 20 seconds, 120% at 10 seconds,
130% at 3 seconds. |
| Short Circuit |
UPS output cut off
immediately |
| BATTERY |
Type |
Sealed, maintenance-free
lead acid batteries, with 3-6 years typical lifetime |
| Typical Recharge Time (to 90%
of full capacity) |
4 Hours |
Back-up Time (minutes)
(a PC with 15" monitor) |
8 - 15 mins |
9 - 17 mins |
15 - 25 mins |
19 - 30 mins |
25 - 40 mins |
| Protection |
Automatic self-test,
Over discharge protection, short circuit protection
by fuse |
| PHYSICAL |
Net Weight kg (lbs) |
2.8 (6.2) |
2.8 (6.2) |
3.3 (7.3) |
3.4 (7.5) |
3.6 (7.9) |
| Dimension WxDxH (mm) |
97 x 265 x 135
3.8" x 10.4" x 5.3" |
| INTERFACE |
Dry Contact |
Sends battery low
& power failure signals, and receives shutdown
signal from computer. |
| RS232 |
Detect battery low,
Schedule UPS on/off, AC input/output power status
display. |
| ALARM |
Battery Back-up |
Slow beeping sound
every 4 seconds (buzzer can be muted by pressing "
" button)
(available on S series models) |
| Battery Low |
Rapid beeping sound
every second |
| 100% Load |
Beep 4 Seconds and
silence 1 second |
| Overload |
Continue beeping
sound |
| ENVIRONMENT |
Ambient Operation |
3,500 meters max.
elevation, 0-95% humidity (No-condensing water), 0-40
deg |
| Audible Noise |
< 40dBA (1 meter
from surface) |