| Tower model |
INV-1500-LCD / INV-1500-LED |
| 19" rack-mount |
INV-1500-LCD RM / INV-1500-LED
RM |
| Power rating |
P.F.=0.7 |
1.5KVA/1050W |
| DC Input |
DC Voltage |
+/- 48V |
| DC voltage range |
+/- 40~56 VDC |
| AC output |
Waveform |
Pure Sine-wave |
| Frequency |
50Hz or 60Hz (Option) |
| Voltage |
100/110/115/120V or 200/208/220/230/240V |
| Voltage regulation |
+/- 2 % |
| Frequency stability |
+/- 0.5 % |
| Power factor |
0.7 (lagging) |
| Harmonic distortion |
<3% of T.H.D. at linear load |
| Overload detection |
>105% for 10 seconds, >130%+/-10%
for 300ms
Crest factor ratio 3 :1 |
| Efficiency |
DC to AC |
> 85 % |
| Protection |
Inside protection |
Overload protection |
| Over temperature protection |
| Short circuit protection |
| Input DC voltage limit protection |
| Noise level |
1m. distance |
< 45 dBA |
LCD Display
(For INV-1500-LCDINV-1500-LCD RM) |
Status |
Indicate inv, backup, fault,
bat capacity,
load capacity, O/P voltage,
inside temperature, fault status |
LED Indicators
(For INV-1500-LED
INV-1500-LED RM |
Status |
inverter output(green), fault(red) |
| Battery capacity |
4 green, 1 red LED and red bar
LEDs
indicates low capacity |
| Load level |
4 green, 1 red LED and red bar
LEDs
indicates overload capacity |
| Alarm |
Input DC voltage |
The first warning will beep every
4 seconds to
indicate battery in use. The second warning will
beep every 1 second to signal battery low condition. |
| UPS fault |
Continuous beeping sound |
| Environment |
Temperature |
0 ~ 40deg |
| Humidity |
0%~95% (Non condensing) |
| Interface |
Dry contact |
Sends battery low signals,and
receives
shutdown signal from computer. |
| RS232 |
Detect battery low, Schedule
UPS on/off,
AC output power status display. |
| Option |
Novell, SNMP, Windows NT, Windows
95/98 |
Physical size
WxDxH (mm) |
Tower model |
145 x 400 x 220 (5.7" x
15.7" x 8.7") |
| 19" rack-mount |
430 x 400 x 130 (16.9 "x
15.7"x 5.1") |
Net weight
(kgs) |
Tower model |
18 (39.7 lb) |
| 19" rack-mount |
25 (55.1 lb) |
