| MODEL |
|
KSL-500AP |
| CAPACITY |
Capacity |
500VA |
| OUTPUT |
Voltage
(on battery) |
Simulated sine wave at 100V /
110V / 115V / 120V or 220V / 230V / 240V +/- 5% |
Frequency
(on battery) |
50 or 60 Hz +/-0.5Hz |
| Voltage Regulation( AVR) |
AVR automatically increase output
voltage 15% above input voltage if -9% to -25% of
nominal.
AVR decrease output voltage 13% below input voltage
if +9% to +25% of nominal |
| Transfer Time |
2 / 4 milliseconds, including
detection time |
| INPUT |
Voltage |
100V / 110V / 115V / 120V or
220V / 230V / 240V +/- 25% at line input |
| Frequency |
50 or 60 Hz +/- 5% (auto sensing) |
PROTECTION
& FILTERING |
Spike Protection |
320 Joules, 2ms |
| EMI/RFI Filter |
10dB at o.15MHz, 50 dB at 30MHz |
| Unit Input |
Fuse for overload & short
circuit protection |
| Overload Protection |
UPS automatic power off if overload
exceeds 110% of
nominal at 60 seconds and 130% at 3 seconds |
| 10 Base-T Cable Port |
Network (UTP, RJ-45) compatible
jacks |
| Short Circuit |
UPS output cut off immediately
or input fuse protection |
| BATTERY |
Type |
Sealed, maintenance-free lead
acid batteries with 3-6 years typical lifetime |
| Typical Recharge Time |
4 hours (to 90% of full capacity) |
Back-up Time
(a PC with 15" monitor) |
20 - 30 mins |
| Protection |
Automatic self-test, Discharge
protection, Replace battery indicator |
| PHYSICAL |
Net Weight Kg(lbs) |
9.0 (19.8) |
| Dimension WxDxH (mm) |
370 x 330 x 45
(14.6" x 13.0" x 1.8") |
| INTERFACE |
RS232 |
Bi-directional communication
port |
| ALARM |
Battery Back-up |
Slow beeping sound (about 0.47
Hz) |
| Battery Low |
Rapid beeping sound (about 1.824
Hz) |
| Overload |
Continuously beeping sound |
| ENVIRONMENT |
Ambient Operation |
3,500 meters max, elevation.
0-95% humidity non-condensing, 0-40 ¢J |
| Audible Noise |
<40dBA (1 meter from surface) |
