| MODEL |
|
KIN-800AP |
KIN-1000AP |
KIN-1200AP |
| CAPACITY |
Capacity |
800AV |
1000AV |
1200AV |
| OUTPUT |
Voltage
(on battery) |
Simulated sine wave
at 100V,110V,115V,120V or 220V,230V,240V +/- 5% |
Frequency
(on battery) |
50 or 60 Hz +/-0.5Hz |
| Voltage Regulation( AVR) |
AVR automatically
increase output voltage 15% above input voltage if
-9% to -25% of nominal.
AVR decrease output voltage 13% below input voltage
if +9% to +25% of nominal |
| Transfer Time |
2 / 4 milliseconds,
including detection time |
| INPUT |
Voltage |
100V,110V,115V,120V
or 220V,230V,240V +/- 25% at line input |
| Frequency |
50 or 60 Hz +/- 5%
(auto sensing) |
PROTECTION
& FILTERING |
Spike Protection |
320 Joules, 2ms |
| EMI/RFI Filter |
10dB at o.15MHz,
50 dB at 30MHz |
| Unit Input |
Fuse for overload
& short circuit protection |
| Overload Protection |
UPS automatic power
off if overload exceeds 110% of
nominal at 60 seconds and 130% at 3 seconds |
| 10 Base-T Cable Port |
Network (UTP, RJ-45)
compatible jacks |
| Short Circuit |
UPS output cut off
immediately or input fuse protection |
| BATTERY |
Type |
Sealed, maintenance-free
lead acid batteries with 3-6 years typical lifetime |
| Typical Recharge Time |
4 hours (to 90% of
full capacity) |
Back-up Time
(a PC with 15" monitor) |
55 - 65 mins |
60 - 70 mins |
65 - 75 mins |
| Protection |
Automatic self-test,
Discharge protection, Replace battery indicator |
| PHYSICAL |
Net Weight Kg(lbs) |
13.3 (29.3) |
15.0 (33.0) |
15.5 (34.1) |
| Dimension WxDxH (mm) |
130 x 382 x 201
(5.1" x 15" x 7.9") |
| INTERFACE |
RS232 |
Bi-directional communication
port |
| ALARM |
Battery Back-up |
Slow beeping sound
(about 0.47 Hz) |
| Battery Low |
Rapid beeping sound
(about 1.824 Hz) |
| Overload |
Continuously beeping
sound |
| ENVIRONMENT |
Ambient Operation |
3,500 meters max,
elevation. 0-95% humidity non-condensing, 0-40 ¢J |
| Audible Noise |
<40dBA (1 meter
from surface) |
