| Wall Mount Model
|
ICL-1700W |
| Power Rating
|
1500W normal 1700W max |
| DC Input |
DC Voltage |
12V |
| DC Voltage Range |
12V +/-2V |
| AC Output |
Waveform |
Simulated sinewave |
| Frequency |
50Hz or 60Hz (Auto sensing) |
| Voltage |
100/110/115/120V or 220/230/240V |
| Voltage Regulation |
+/- 5 % (INV Mode), +10% -15%
(Line mode) |
| Frequency Stability
|
+/- 1Hz (INV Mode), +/-10% (Line
mode) |
| OverloadDetection |
> 110 % for 60 seconds, >130%
for 3seconds |
| Charging Current (can
be adjusted by selecor) |
70A max |
| Protection |
Inside Protection
|
Overload protection |
| Over temperature protection |
| Short circuit protection |
| Input DC voltage limit protection |
| Noise Level |
1M. distance |
< 45 dBA |
| LED Indicators |
Red |
1.LED off when battery in
float charging |
| 2.LED flashs slowly when battery
in absorption charging |
| 3.LED flashs fastly when battery
is low capacity |
| 4.LED illuminates when battery
is fault |
| Green |
LED illuminates when UPS in line
mode |
| Yellow |
LED illuminates when UPS in backup
mode |
| Alarm |
Battery Back-up |
Slow beeping sound (about 0.47Hz) |
| Battery Low |
Rapid beeping sound (about 1.824Hz) |
| Over Load / UPS Fault |
Continually beeping sound |
| Environment |
Temperature |
0 ~ 40deg |
| Humidity |
0%~95% (Non-condensing water) |
Interface |
RS232 |
Battery low detecting, UPS on/off
scheduling,
AC output power status display. |
| Physical Size |
W x D x H mm (inch) |
225 x 582 x 205 (8.9" x
22.9" x 8.1") |
| Net Weight |
Kg (lb.) |
26.2 (57.64 lb) |
